ROUND
- Extra wide 8" Top Seat, Hot Dipped Galvanized Copper Bearing Steel G90. Bonded with ruffcoate finish.
- Extra wide Upright Hot Dipped Galvanized Copper Bearing Steel G90. Bonded with ruffcoate finish.
- Caps, Snap Sets, Polymer Resin, with Stainless Steel Screws for Fastening.
- Large Curved Wall Rails, 1" x 3/4" encircle entire pool wall
- Extra Wide Bearing, Polymer Resin Top and Bottom Joiners, affording increased footing spread supports for Uprights and Curved Rails where joined.
- Aluminum Extruded, Curved Bead Receptor Track
| SIZE | GALLONS |
| 12' x 52" | 3,655 |
| 15' x 52" | 5,727 |
| 18' x 52" | 8,247 |
| 21' x 52" | 11,255 |
| 24' x 52" | 14,662 |
| 27' x 52" | 18,555 |
| 30' x 52" | 22,900 |
OVAL
- 52" High Wall, superior exterior look. Layered Resin Pool Wall extra protected with Hot Dipped Galvanized Copper Bearing Steel, G90 Trademarked, Copyrighted Wall Pattern on Face Side. Epoxy Coated on inside for additional rust resistance.
- Deep Ribbed Corrugated Wall for increased strength and flexibility during and after installation.
- Easily assembled Wall Bar Connectors with reinforced Aluminum Bars affixed-joined with 32, 1/4"-20 × 5/8" Truss-Head Bolts and 1/4"-20 Nylon Nuts for additional fixed fastenings.
- Pre-Punched Thru the Wall Skimmer and Return Outlet openings for ease of installation and liner protection.
- All Structural Painted Parts are electrostatically polyester dry powder coated with minimum .015" thickness after final fabrication.
- All Hardware is Stainless Steel.
- Oval Buttresses, Braces, are Aluminum Extrusion. Electrostatically polyester dry Powder Coated High Gloss Finish.
| SIZE | GALLONS |
| 12' x 18' x 52" | 7,000 |
| 12' x 21' x 52" | 8,167 |
| 12' x 24' x 52" | 9,334 |
| 15' x 24' x 52" | 11,667 |
| 15' x 30' x 52" | 14,584 |
| 18' x 33' x 52" | 19,252 |
| 18' x 39' x 52" | 22,752 |
